The MR2 Owner's Club of New Zealand

Ok its time for new components.
I was going to go for the infinity 6.1 perfect comp set but they are out of stock for a month, am looking for around 130 wrms, those where 100 wrms with credibility to go with it, now i,m looking around seeing other stuff maybe better suited.
Whats the soundstream stuff like? Kicker?.
do i wait for the infintys?.
I like deep mid base but not bright tweeters,
Any suggestions from experience around the $400 mark?.
thx

Kicker RS-562 Speakers
Woofer, in (cm) 6-1/2 (16.6)
Tweeter, in (cm) 1 (2.5)
Power Handling Watts, Peak (RMS) 200 (100)
Sensitivity [SPLo], dB @ 1W, 1m 87
Frequency Response, Hz 40-21k
Hole Cut-Out Diameter, in (cm) 5-7/16 (13.
Woofer Mounting Depth, in (cm) 2-3/4 (7.0)
Crossover Point, (Hz) 4.5k
Crossover Slope, dB (Octave) 12 hi (6 lo)

or

Infinity Perfect 6.1 Comp
Specifications
Sensitivity 90 dB at 1 watt
Frequency Response 75 - 23k Hz
RMS Power Range (Watts) 25-100
Peak Power Handling (Watts) 400
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 5/8
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5 1/16

or

Soundstream PCC.6N
SPECIFICATIONS:
RMS POWER (WATTS) 125
MAGNET WEIGHT (Oz) 13
CROSSOVER FREQUENCIES
High-Pass (Hz)
Low-Pass 3.3K
3K
CROSSOVER SLOPE 18dB
SENSITIVITY 91dB
FREQUENCY RESPONSE (Hz) 50 - 20K
VOICE COIL SIZE (INCHES) 1
WOOFER MOUNTING DEPTH (INCHES) 2.6

or

Soundstream XTC.6 / XPRO-6
SPECIFICATIONS:
RMS POWER (WATTS) 110
MAGNET WEIGHT (Oz) 12
CROSSOVER FREQUENCIES
High-Pass (Hz)
Low-Pass (Hz) 3.3K
3K
CROSSOVER SLOPE 12dB
SENSITIVITY 90dB
FREQUENCY RESPONSE (Hz) 85 - 20K
VOICE COIL SIZE (INCHES) 1.0

Pioneer TS-C171's are a pretty decent speaker for the coin. Heard the next model down in the series and was very impressed.

I assume you're getting the Infinitys for about the $400 mark? In which case thats a pretty sweet deal, and probably worth holding out for

Thx for that i was keen to go with pioneer as am impressed with the sub i and head deck i am running but those ones and most of the pioneer ones are a low wrms, those particular ones only 50w max 200w
infinitys 100 wrms and 400w max
my amp is pushing 130 watts per channel so i am trying to be as close to that as i can.

i wouldnt go kicker, i tryed them and they are tinny as hell as they sound rubbish, i have sony comps in mine, sound mint.

swt thx for the advice, tin and bass just dont go together.

Not sure if you've purchased them or not yet, but I've gone for the Infinity Kappa Perfect 6.1's, the tweeters are a little bright, but just tone it down to -4dB and they sing!